Converters / switches

Tip

L&S Mec Driver 12 / 24V, 60/72W, white

DescriptionMEC Driver LED converter, 60/72 W, 12/24 VThe MEC Driver LED converter is used to distribute and control LED lighting in the kitchen. The switching unit can be used with either 12 or 24 volt currents. It is compatible with the LUMICA® LIC LED system, which enables intelligent lighting control. The converter is made of plastic in the colour white. It is equipped with a connection cable of 2,000 mm in length. There is a choice of different wattages.- white- 12/24 VDC- 2000 mm mains connection cable- Note the connected loads (watts) of the individual converters Manufacturer information according to general product safety regulations (GPSR) L&S Mec Driver 12 / 24V, 60/72W, white Manufacturer: L & S DEUTSCHLAND GmbH Street: Daimlerring 34 City:32289 Rödinghausen Country: Germany E-mail: info@ls-deutschland.de Phone no.: 05223/87900

€96.95*

Tip

MEC Driver LED 1-channel module radio/ZigBee, 12 V

Description MEC Driver LEDMEC Driver LED 1-channel module radio/ZigBee, 12 VThe MEC Driver LED 1-channel module radio/ZigBee switching unit is used for signal conversion in kitchen lighting. It can be controlled by remote control or smart home application. Thanks to the integrated ZigBee Mesh, control is also possible without a bridge, as the components connect to each other. The driver also offers switching between ambient lighting and individual lighting. It provides one channel with four LED outputs. The accessory is compatible with the LUMICA® LIC LED system. The compact module is made of plastic in the colour white. It is available in different current ratings.- White colour- 1-channel, 4 LED outputs- max. 3 A per output, max. 5 A total- Control via remote control or smart home- ZigBee Mesh even without a bridge (components connect to each other)- Simple teach-in- Switchable between Emotion and single colour LEDs Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€79.95*

Tip

New

MEC Driver LED 4-channel module radio/ZigBee, 12 V

DescriptionMEC Driver LED 4-channel module radio/ZigBee, 12 VThe MEC Driver LED 4-channel radio/ZigBee module switching unit provides convenient control of kitchen lighting. Signalling can be carried out either via remote control or smart home application. The ZigBee Mesh also ensures a direct connection between the components without the need for a bridge. The switch also enables simple selection between individual and ambient lighting. Four separate channels are available, each with one LED output. The driver is compatible with the LUMICA® LIC LED system. The compact module is made of white plastic. Different current levels are available.- white- 4 channels with one LED output each- max. 3 A per output, max. 5 A in total- Control via remote control or smart home- ZigBee Mesh even without a bridge (components connect to each other)- Simple teach-in- Switchable between Emotion and single colour LEDs Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€69.95*

Tip

New

MEC Driver LED 4-channel module radio/ZigBee, 24 V

Description MEC Driver LEDMEC Driver LED 4-channel module radio/ZigBee, 24 VThe MEC Driver LED 4-channel radio/ZigBee module switching unit provides convenient control of kitchen lighting. Signalling can be carried out either via remote control or smart home application. The ZigBee Mesh also ensures a direct connection between the components without the need for a bridge. The switch also enables simple selection between individual and ambient lighting. Four separate channels are available, each with one LED output. The driver is compatible with the LUMICA® LIC LED system. The compact module is made of white plastic. Different current levels are available.- white- 4 channels with one LED output each- max. 3 A per output, max. 5 A in total- Control via remote control or smart home- ZigBee Mesh even without a bridge (components connect to each other)- Simple teach-in- Switchable between Emotion and single colour LEDs Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€69.95*

Tip

New

MEC Driver LED converter, 120 W, 24 V

Description: MECMEC Driver LED converter, 120 W, 24 VThe MEC Driver LED converter is used to distribute and control LED lighting in the kitchen. The switching unit can be used with either 12 or 24 V currents (90 W/120 W only 24 V). It is compatible with the LUMICA® LIC LED system, which enables intelligent lighting control. The converter is made of plastic in the colour white. It is equipped with a connection cable of 2,000 mm in length. There is a choice of different wattages.- white- 2000 mm mains connection cable- Note the connected loads (watts) of the individual converters Manufacturer information according to general product safety (GPSR)L&S Mec Driver 12 / 24V, 60/72W, whiteManufacturer: L & S DEUTSCHLAND GmbHStreet: Daimlerring 34City:32289 RödinghausenCountry: GermanyE-mail: info@ls-deutschland.dePhone no.: 05223/87900

€99.95*

Tip

MEC Driver LED converter, 18 W, 12/24 V

Description: MECMEC Driver LED converter, 18 W, 12/24 VThe MEC Driver LED converter is used to distribute and control LED lighting in the kitchen. The switching unit can be used with either 12 or 24 volt currents. It is compatible with the LUMICA® LIC LED system, which enables intelligent lighting control. The converter is made of plastic in the colour white. It is equipped with a connection cable of 2,000 mm in length. There is a choice of different wattages.- white- 12/24 VDC- 2000 mm mains connection cable- Note the connected loads (watts) of the individual converters Manufacturer information according to general product safety regulations (GPSR) L&S Mec Driver 12 / 24V, 60/72W, whiteManufacturer: L & S DEUTSCHLAND GmbHStreet: Daimlerring 34City:32289 RödinghausenCountry: GermanyE-mail: info@ls-deutschland.dePhone no.: 05223/87900

€35.95*

Tip

MEC Driver LED converter, 36 W, 12/24 V

DescriptionMEC Driver LED converter, 36 W, 12/24 VThe MEC Driver LED converter is used to distribute and control LED lighting in the kitchen. The switching unit can be used with either 12 or 24 volt currents. It is compatible with the LUMICA® LIC LED system, which enables intelligent lighting control. The converter is made of plastic in the colour white. It is equipped with a connection cable of 2,000 mm in length. There is a choice of different wattages.- white- 12/24 VDC- 2000 mm mains connection cable- Note the connected loads (watts) of the individual converters Manufacturer information according to general product safety regulations (GPSR)L&S Mec Driver 12 / 24V, 60/72W, whiteManufacturer: L & S DEUTSCHLAND GmbHStreet: Daimlerring 34City:32289 RödinghausenCountry: GermanyE-mail: info@ls-deutschland.dePhone no.: 05223/87900

€51.09*

Tip

New

MEC Driver LED distribution module, 12 V

Description of theMEC Driver LED distribution module, 12 VThe MEC Driver LED distribution module is used to connect LED lighting components in the kitchen. It provides a total of eight LED outputs of 3 amps each. The module can be used as a standard converter without radio transmission. It can be easily integrated into the LUMICA® LIC LED system for intelligent lighting control. The housing of the switching unit is made of plastic in the colour white. Variants with different current ratings are available.- white- 12/24 VDC, max. 3 A per output, max. 5 A total- 8 LED outputs- Variant without radio: Driver can be used as a standard converter Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€19.85*

Tip

New

MEC Driver LED distribution module, 24 V

Description of theMEC Driver LED distribution module, 24 VThe MEC Driver LED distribution module is used to connect LED lighting components in the kitchen. It provides a total of eight LED outputs of 3 amps each. The module can be used as a standard converter without radio transmission. It can be easily integrated into the LUMICA® LIC LED system for intelligent lighting control. The housing of the switching unit is made of plastic in the colour white. Variants with different current ratings are available.- white- 12/24 VDC, max. 3 A per output, max. 5 A total- 8 LED outputs- Variant without radio: Driver can be used as a standard converter Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€19.85*

Tip

New

MEC Driver LED motion detector, surface-mounted housing

Description: MECMEC Driver LED motion detector, surface-mounted housingThe MEC Driver LED motion detector is intended for use with the MEC Driver switching module. It has a connection cable of 2,000 mm for flexibility of use. The run-on time can be conveniently set via the function module. With its simple black design, the connecting cable has an unobtrusive appearance.- black- Use with the MEC Driver switching module- Setting the run-on time via the function module- 2000 mm connection cableAccessories:7061416 Motion detector Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€9.95*

Tip

New

MEC Driver LED Sensor IR/TK, Sensor

DescriptionMEC Driver LED Sensor IR/TK, SensorThe MEC Driver LED Sensor IR/TK is suitable for use with the MEC Driver switching module and offers a dimming or door contact function depending on the setting of the function module. The run-on time can be set individually via the function module. The maximum range of the sensor is 50 mm. Its connection cable has a length of 2,000 mm. The accessory is compatible with the LIC system.- Black- Use with the MEC Driver switching module- Dimming or door contact function, depending on the setting of the function module- Setting the run-on time via the function module- Range max. 50 mm- Connection cable 2000 mmAccessories:7061415 Surface-mounted housing Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€19.95*

Tip

New

MEC Driver LED Sensor IR/TK, surface-mounted housing

DescriptionMEC Driver LED Sensor IR/TK, surface-mounted housingThe MEC Driver LED Sensor IR/TK is suitable for use with the MEC Driver switching module and offers a dimming or door contact function depending on the setting of the function module. The run-on time can be set individually via the function module. The maximum range of the sensor is 50 mm. Its connection cable has a length of 2,000 mm. The accessory is compatible with the LIC system.- Black- Use with the MEC Driver switching module- Dimming or door contact function, depending on the setting of the function module- Setting the run-on time via the function module- Range max. 50 mm- Connection cable 2000 mmAccessories:7061414 MEC Driver LED Sensor IR / TK Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€9.95*

Tip

New

MEC Driver LED switch, black

DescriptionMEC Driver LED switch, blackThe MEC Driver LED switch enables the MEC LED Driver switching module to be switched on and off. The length of the connecting cable is 2,000 mm, offering flexibility of use. With its simple black colour, the wired switch has an unobtrusive appearance. It is compatible with the LIC system and can be easily integrated into the existing installation.- Wired- ON/OFF switch for the MEC LED Driver switching module- 2000 mm connection cable Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€14.95*

Tip

New

MEC Driver LED switching module, 12 V

DescriptionMEC Driver LED switch module, 12 VWith the MEC Driver LED switching module, LED lighting in the kitchen can be controlled as required. The switching unit enables control via wired or wireless sensors. Switching is possible via infrared, touch or motion detector. Three light groups are available, each with two LED outputs. The light colour can be set via DIP switches. The module is compatible with the intelligent lighting control system from the LUMICA® LIC LED system. It is made of plastic in the neutral colour white. The selection includes different amperages.- white- max. 3 A per output, max. 5 A in total- Control via wired and/or wireless sensors (IR, capacitive or motion detector)- 3 luminaire groups with 2 LED outputs each- Group switching (3 groups) or cross switching of the LED outputs- Light colour adjustable via DIP switch (emotion light required)7061413 same article, but 24V Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€79.95*

Tip

New

MEC Driver LED switching module, 24 V

Description MEC DriverMEC Driver LED switch module, 24 VWith the MEC Driver LED switching module, LED lighting in the kitchen can be controlled as required. The switching unit enables control via wired or wireless sensors. Switching is possible via infrared, touch or motion detector. Three light groups are available, each with two LED outputs. The light colour can be set via DIP switches. The module is compatible with the intelligent lighting control system from the LUMICA® LIC LED system. It is made of plastic in the neutral colour white. The selection includes different amperages.- white- max. 3 A per output, max. 5 A in total- Control via wired and/or wireless sensors (IR, capacitive or motion detector)- 3 luminaire groups with 2 LED outputs each- Group switching (3 groups) or cross switching of the LED outputs- Light colour adjustable via DIP switch (emotion light required) 7061412 same article, but 12VManufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

€79.95*

Tip

Naber 7013046, Wippschalter, silberfarbig, Erkelenz

Naber 7013046, rocker switch, silver-coloured

DescriptionRocker switch, silver-colouredThe rocker switch makes it easy to switch the lighting in your home on and off. With its timeless silver-coloured design, it blends in with all furnishing concepts. The switch has a switching voltage of 230 V and a switching current of 16 A.- Contact single-pole output- Switching voltage 230 V- Switching current 16 A

€17.95*

Tip

Naber 7013047, Schukosteckdose, silberfarbig/schwarz, Erkelenz

Naber 7013047, Schuko socket outlet, silver coloured/black

DescriptionSchuko socket outlet, silver coloured/blackThe Schuko socket outlet reliably supplies your own household appliances with power and offers increased safety thanks to the protective contact connection. With its timeless design and attractive colour combination, it can be integrated into any interior style. The socket outlet has a voltage of 230 V and a rated current of 10/16 A.- Voltage 230 V- Current 10/16 A

€23.95*

Tip

Naber 7013048, Schukosteckdose mit Klappdeckel, silberfarbig/schwarz, Erkelenz

Naber 7013048, Schuko socket outlet with hinged cover, silver colour/black

DescriptionSchuko socket outlet with hinged cover, silver colour/blackThe Schuko socket outlet with hinged cover enables power supply indoors and is easy to install. With its modern, rounded design, it matches many interior design concepts. The practical hinged cover conceals the socket outlet when it is not in use and increases general safety. The socket outlet has a voltage of 230 V and a rated current of 10/16 A.- Voltage 230 V- Current 10/16 A

€25.95*

Tip

Naber 7013049, Abdeckrahmen 1, silberfarbig, Erkelenz

Naber 7013049, cover frame 1, silver-coloured

Description Cover frameCover frame 1, silver-colouredCover frame 1 is an accessory for electrical installations and can be used as a surround for switches and sockets. It is visually impressive with its discreet and timeless design in silver colours. Made of plastic, the cover is characterised by durable and robust properties.1-gang. For switches and socket outlets.- Plastic

€16.95*

Tip

Naber 7013050, Abdeckrahmen 2, silberfarbig, Erkelenz

Naber 7013050, cover frame 2, silver-coloured

Description Cover frameCover frame 2, silver-colouredThe double cover frame 2 is used in electrical installations and provides a surround for two socket outlets or switches. It impresses with its simple and timeless design, allowing it to fit seamlessly into any living concept. The cover is made of durable and robust quality plastic.Double. For switches and socket outlets.- Plastic

€19.95*

Tip

— 2 x 2000 mm mit eckigem Aufbauschalter — Euroflachstecker — Euroflachkupplung

Naber 7031092, Mains connection cable with aperture switch

Description: Mains cableMains connection cable with panel switch, white- 2 x 2000 mm with square surface-mounted switch- Euro flat plug- Euro flat coupling

€24.95*

Tip

Naber 7061025, LED converter 12

Description: LED converterLED converter 12, grey- 15 Watt, 12 VDC- with 6-way distributor- 2000 mm mains connection cable- Note the connected loads (watts) of the individual lights

€32.95*

Tip

Naber LED Konverter 30, 7061026, LED Beleuchtung, Leuchte, Lampe, Beuchtung, Erkelenz

Naber 7061026, LED converter 30,

Description: LED converterLED converter 30, grey- 30 Watt, 12 VDC- with 6-way distributor- 2000 mm mains connection cable- Note the connected loads (watts) of the individual lights

€45.95*

Tip

Naber 7061078,LED,Konverter,60Watt,12V DC,Erkelenz

Naber 7061078, LED converter 60, grey

Description: LED converterLED converter 60, grey- 60 Watt, 12 VDC- with 12-way distributor- 2000 mm mains connection cable- Note the connected loads (watts) of the individual lights- 30 x 180 x 52 mm (H x L x W)- The connection per slot group must not exceed 36 watts. Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

€54.95*

Welcome to our new online presence

Converters / switches

Why shop with us?