Compair STEEL flow System 150
Tip
Naber 4043029, silencer, Ø 150 mm, L 460 mm
€61.70*
Silencer descriptionSilencer 150, Ø 150 mm, L 460 mmWith the high-quality COMPAIR® silencer 150, the volume of the extractor system can be significantly reduced. Thanks to its thick aluminium tube design, the ventilation duct silencer is extremely stable. A 25 mm/16 kg per cubic metre thick glass wool insert provides damping. Depending on the frequency, this results in a sound reduction of up to 22 dB. The material is non-combustible in accordance with DIN 4102. The ventilation damper is designed for connection to round plastic ducts with a diameter of 150 mm.Extremely stable design thanks to the use of thick aluminium pipe. 25 mm/16 kg per m³ glass wool insert reduces the sound by up to 22 dB depending on the frequency, non-combustible (A1) according to DIN 4102.- Connection to plastic round tube
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061001, AOMPAIR STEEL flow 150 flat duct pipe, length 500 mm, galvanised steel
€74.50*
DescriptionSTEEL flow SF-VRO flex 150 flat duct, aluminium, L 500 mmThe COMPAIR® STEEL flow SF-VRO flex 150 flat duct pipe is made of durable, non-combustible material. Thanks to its flexible properties, it is suitable for pipe bends (< - 90°) and parallel offsets within the ventilation system, for example. If required by the structural conditions, the ventilation duct can be shortened. SF profile seals are pre-assembled on both sides, resulting in a connection dimension of 216 x 83 mm. If the seals are removed, a connection with plastic flat ducts is possible without any problems.Ventilation duct, flexible.- Can be shortened- Connection dimension metal duct 216 x 83 mm (with seal)- 2 SF profile seals pre-assembled- Can be used for e.g. bends (<90°) or parallel offset- connection to a plastic flat duct is possible after removing the profile seal
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061002, COMPAIR Steel flow 150 flat duct, length 1000 mm, galvanised steel
€100.75*
DescriptionSTEEL flow SF-VRO flex 150 flat duct, aluminium, L 1000 mmThe COMPAIR® STEEL flow SF-VRO flex 150 flat duct pipe is made of durable, non-combustible material. Thanks to its flexible properties, it is suitable for pipe bends (< - 90°) and parallel offsets within the ventilation system, for example. If required by the structural conditions, the ventilation duct can be shortened. SF profile seals are pre-assembled on both sides, resulting in a connection dimension of 216 x 83 mm. If the seals are removed, a connection with plastic flat ducts is possible without any problems.Ventilation duct, flexible.- Can be shortened- Connection dimension metal duct 216 x 83 mm (with seal)- 2 SF profile seals pre-assembled- Can be used for e.g. bends (<90°) or parallel offset- connection to a plastic flat duct is possible after removing the profile seal
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061003, COMPAIR Steel flow 150 flat duct, length 1000mm, galvanised steel
€94.45*
DescriptionSTEEL flow SF-VRO 150 flat duct pipe, galvanised steel, L 1000 mmThe COMPAIR® STEEL flow SF-VRO 150 flat duct pipe is characterised by its durable quality and extreme load-bearing capacity. It is made of non-combustible material so that even high fire protection requirements are met. The ventilation duct can be shortened for customised installation solutions. SF profile seals are pre-assembled on both sides, reducing the connection dimension to 216 x 83 mm. After removal, a connection with plastic ducts is possible without any problems. SF-VRO 150 support bars with a load capacity of up to 100 kg are recommended as accessories for floor installations.Ventilation pipe.- Can be shortened- Connection dimension metal duct 216 x 83 mm (with seal)- 2 SF profile seals pre-assembled- After removing the profile seal, connection to a plastic flat duct is possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061004, COMPAIR Steel flow 150 flat duct, length 500 mm, galvanised steel
€71.35*
DescriptionSTEEL flow SF-VRO 150 flat duct pipe, galvanised steel, L 500 mmThe COMPAIR® STEEL flow SF-VRO 150 flat duct pipe is characterised by its durable quality and extreme load-bearing capacity. It is made of non-combustible material so that even high fire protection requirements are met. The ventilation duct can be shortened for customised installation solutions. SF profile seals are pre-assembled on both sides, reducing the connection dimension to 216 x 83 mm. After removal, a connection with plastic ducts is possible without any problems. SF-VRO 150 support bars with an impact load of up to 100 kg are recommended as accessories for a floor structure.Ventilation pipe.- Can be shortened- Connection dimension metal duct 216 x 83 mm (with seal)- 2 SF profile seals pre-assembled- After removing the profile seal, connection to a plastic flat duct is possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061006, SR-R flex 150 round tube, L 350 mm, galvanised steel
€35.12*
DescriptionSTEEL flow SR-R flex 150 round duct, aluminium, stainless steel, L 350 mmThe flexible COMPAIR® STEEL flow SR-R flex 150 round pipe is used to customise the installation of a ventilation duct in the kitchen. It can be laid straight or planned for bends up to a maximum of 90° as well as parallel offsets. If required, its length can be reduced by around 50 % by compressing it. The ventilation pipe has an internal diameter of 148 mm. It is made of aluminium with a stainless steel spigot and socket. Thanks to its non-combustible properties, it can fulfil high fire protection requirements. The flexible duct is available in different lengths.Ventilation duct, flexible.- Ø 148 mm (internal connection dimension)- Length can be reduced by approx. 50 % by compressing- Can be used for bends (<90°) or parallel offset
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061007, SR-R flex 150 round tube, L 500 mm, galvanised steel
€38.80*
DescriptionSTEEL flow SR-R flex 150 round duct, aluminium, stainless steel, L 500 mmThe flexible COMPAIR® STEEL flow SR-R flex 150 round pipe is used to customise the installation of a ventilation duct in the kitchen. It can be laid straight or planned for bends up to a maximum of 90° as well as parallel offsets. If necessary, its length can be reduced by around 50 % by compressing it. The ventilation pipe has an internal diameter of 148 mm. It is made of aluminium with a stainless steel spigot and socket. Thanks to its non-combustible properties, it can fulfil high fire protection requirements. The flexible duct is available in different lengths.Ventilation duct, flexible.- Ø 148 mm (internal connection dimension)- Length can be reduced by approx. 50 % by compressing- Can be used for bends (<90°) or parallel offset
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061008, SR-R flex 150 round tube, L 1000 mm, galvanised steel
€51.40*
DescriptionSTEEL flow SR-R flex 150 round duct, aluminium, stainless steel, L 1000 mmThe flexible COMPAIR® STEEL flow SR-R flex 150 round pipe is used to customise the installation of a ventilation duct in the kitchen. It can be laid straight or planned for bends up to a maximum of 90° as well as parallel offsets. If required, its length can be reduced by around 50 % by compressing it. The ventilation pipe has an internal diameter of 148 mm. It is made of aluminium with a stainless steel spigot and socket. Thanks to its non-combustible properties, it can fulfil high fire protection requirements. The flexible duct is available in different lengths.Ventilation duct, flexible.- Ø 148 mm (internal connection dimension)- Length can be reduced by approx. 50 % by compressing- Can be used for bends (<90°) or parallel offset
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061009, SR-R 150 round tube, L 500 mm, galvanised steel
€41.95*
DescriptionSTEEL flow SR-R 150 round duct, galvanised steel, L 500 mmThe flexibly shortenable COMPAIR® STEEL flow SR-R 150 round duct is used to create a ventilation duct in conjunction with an extractor system. It has an internal diameter of 148 mm and can be combined with any extension elements or pipe bends from the COMPAIR® STEEL flow programme. The duct is made of galvanised and therefore non-combustible steel. It is available in different lengths.Ventilation pipe.- Ø 148 mm (internal connection dimension)- Can be shortened
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061010, SR-R 150 round tube, L 1000 mm, galvanised steel
€45.10*
DescriptionSTEEL flow SR-R 150 round duct, galvanised steel, L 1000 mmThe flexibly shortenable COMPAIR® STEEL flow SR-R 150 round duct is used to create a ventilation duct in conjunction with an extractor system. It has an internal diameter of 148 mm and can be combined with any extension elements or pipe bends from the COMPAIR® STEEL flow programme. The duct is made of galvanised and therefore non-combustible steel. It is available in different lengths.Ventilation pipe.- Ø 148 mm (internal connection dimension)- Can be shortened
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061011, SF-EST 150 end piece, galvanised steel
€47.20*
DescriptionSTEEL flow SF-EST 150 end piece, galvanised steelThe robust COMPAIR® STEEL flow SF-EST 150 end piece creates a smooth transition from flat to round without any loss of flow. It is used to integrate a ventilation duct for the kitchen extractor system. The moulded part is ideal for the flat ducts SF-VRO flex and SF-VRO with connection size 216 x 83 mm as well as for the round ducts SR-R flex and SR-R with a diameter of 150 mm. Plastic round ducts can also be connected. The connecting element is made of stainless galvanised steel. Thanks to its non-combustible properties, it can also be used in regions with higher fire protection requirements.Transition from flat to round.- Suitable for flat ducts SF-VRO flex and SF-VRO- Suitable for round ducts SR-R flex and SR-R- Connection to a plastic round duct possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061012, STEEL flow SF-UR 150 deflector 90°, galvanised steel
€47.20*
Description STEEL flowSTEEL flow SF-UR 150 deflector 90°, galvanised steelMade of galvanised steel, the COMPAIR® STEEL flow SF-UR 150 deflector 90° is characterised by its non-combustible quality. Thanks to the integrated air deflector technology, optimised volume flows are created within the system. The ventilation moulding is used for the transition from round to flat and is compatible with the SF-VRO flex and SF-VRO flat ducts and the SR-R flex and SR-R round ducts. The moulded part can also be connected to plastic round ducts for the continuation of the ventilation system.With air baffle.- Suitable for flat ducts SF-VRO flex and SF-VRO- Suitable for round ducts SR-R flex and SR-R- Connection to a plastic round duct possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061013, STEEL flow SF-RBV 150 Pipe bend vertical 90°, galvanised steel
€45.10*
DescriptionSTEEL flow SF-RBV 150 vertical 90° elbow, galvanised steelMade of galvanised steel, the COMPAIR® STEEL flow SF-RBV 150 vertical 90° elbow meets even the highest fire protection requirements. Integrated air baffles ensure an optimised volume flow when the extract air is routed to the outside. The moulded part is compatible with the SF-VRO flex and SF-VRO flat ducts from the series for integration into the ventilation system.With air baffle.- Suitable for SF-VRO flex and SF-VRO flat ducts
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061014, COMPAIR Steel flow 150 Pipe bend horizontal 90° galvanised steel
€49.30*
Description STEEL flowSTEEL flow SF-RBH 150 horizontal 90° pipe bend, galvanised steelThe COMPAIR® STEEL flow SF-RBH 150 horizontal 90° pipe bend is used when a corner deflection of the ventilation duct is required. It is manufactured in non-combustible quality from galvanised steel so that it meets high fire protection requirements. Integrated air deflectors ensure optimised routing of the exhaust air to the outside area. The moulded part is compatible with the SF-VRO flex and SF-VRO series flat duct pipes.With air baffle.- Suitable for SF-VRO flex and SF-VRO flat ducts
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061017, COMPAIR Steel flow 150 pipe connector, galvanised steel
€32.50*
DescriptionSTEEL flow SF-RVB 150 pipe connector, galvanised steelThe robust COMPAIR® STEEL flow SF-RVB 150 pipe connector makes it easy to join the flat ducts of the extractor system. It is compatible with the SF-VRO flex and SF-VRO flat ducts from the COMPAIR® STEEL flow series. Thanks to the integrated centre bar, the connecting piece offers a high impact load of up to 100 kg. The ventilation duct element is made of galvanised sheet steel, which gives it rustproof and non-combustible properties.Connector for flat ducts.- Suitable for SF-VRO flex and SF-VRO flat ducts
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061018, SR-RBV 150 Pipe bend 90° galvanised steel
€44.05*
DescriptionSTEEL flow SR-RBV 150 pipe bend 90°, galvanised steelThe vertical COMPAIR® STEEL flow SR-RBV 150 pipe bend allows the ventilation duct to be laid close to corners thanks to its small internal radius of just 127 mm. The 90° connecting element is compatible with the SR-R flex and SR-R round ducts from the COMPAIR® STEEL flow series and is also used to connect plastic round ducts with a diameter of 150 mm. It is equipped with air baffles that counteract flow loss. It also integrates sealing lips on both sides. The ventilation fitting is made of galvanised steel, which means it meets high fire protection requirements.With air deflector.- Installation close to corners possible due to small internal radius- Suitable for SR-R flex and SR-R round ducts- Connection to a plastic round duct possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061019, SR-VBS 150 pipe connector, galvanised steel
€15.70*
DescriptionSTEEL flow SR-VBS 150 pipe connector, galvanised steelThe COMPAIR® STEEL flow SR-VBS 150 pipe connector is ideal for joining two pipe or hose sections in the extractor system. It fits perfectly with the SR-R flex and SR-R round ducts from the COMPAIR® STEEL flow programme. Plastic round ducts with a diameter of 150 mm can also be connected. The two pipe spigots each have a length of 38 mm. The pipe element is made of galvanised sheet steel, which is characterised by its non-combustible and rustproof properties. The connecting element is equipped with two sealing lips, which ensure a secure and tight transition.For connecting two pipe/hose sections.- Suitable for round pipes SR-R flex and SR-R- Connection to a plastic round pipe possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061020, SR 150 Wall connection piece, galvanised steel
€30.10*
DescriptionSTEEL flow SR 150 wall connection piece, galvanised steelThe high-quality COMPAIR® STEEL flow SR 150 wall connection piece ensures a tight connection of round ducts in the exhaust air duct of the extractor hood. The connection piece is suitable for the SR-R flex and SR-R round ducts from the COMPAIR® STEEL flow programme. It can also be connected to a plastic round duct with a diameter of 150 mm. Thanks to the galvanised steel design, the connector is characterised by rust-free and non-combustible features. It is equipped with pipe spigots on both sides, each 38 mm long, as well as sealing lips for an airtight transition. The integrated mounting plate already has screw holes for easy wall mounting. A wall opening 155 mm thick is required.- Wall opening Ø approx. 155 mm- Suitable for SR-R flex and SR-R round pipes- Connection to a plastic round tube possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061021, SR-KDA 150 Condensate separator, galvanised steel
€81.55*
DescriptionSTEEL flow SR-KDA 150 condensation water separator, galvanised steelThe COMPAIR® STEEL flow SR-KDA 150 condensation water separator is used to drain condensation water so that it does not flow back into the extractor bonnet when the exhaust air is routed vertically. It is suitable for the SR-R flex and SR-R round ducts. The condensate drain can also be used for connection to a plastic pipe. The filling volume is 115.5 ml.Prevents condensation from running back into the extractor bonnet with vertical exhaust air routing. Flow-optimised design by avoiding sharp-edged flow break-off edges.- Filling volume 115.5 ml- Suitable for SR-R flex and SR-R round ducts- Connection to a plastic round duct possible
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061022, COMPAIR Steel flow 150 flat duct support, galvanised steel
€21.95*
DescriptionSTEEL flow SF 150 flat duct support, galvanised steelThe COMPAIR® STEEL flow SF 150 flat duct bracket is used to securely install the flat duct on ceilings and walls. It is used for SF-VRO flex and SF-VRO flat ducts with a diameter of 150 mm. To minimise noise and vibrations when the air flows through, the bracket is equipped with integrated damping. The material used is high-quality steel, which is extremely robust and weather and corrosion resistant thanks to the galvanised surface.For installing the flat duct on ceilings and walls.- With damping- Recommended distance between two brackets 500 mm- suitable for SF-VRO flex and SF-VRO flat trunking
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061023, SR 150 round duct support, galvanised steel
€17.80*
DescriptionSTEEL flow SR 150 round duct bracket, galvanised steelThe COMPAIR® STEEL flow SR 150 round duct bracket enables the reliable wall and ceiling mounting of round ducts with a diameter of 150 mm. It is suitable for round ducts from the SR-R flex and SR-R series. Thanks to the integrated damping, the bracket reduces vibrations and noise that can occur when air flows through it. It is made of high-quality, weather-resistant galvanised steel.For wall and ceiling mounting.- With damping- Recommended distance between two brackets 500 mm- suitable for round ducts SR-R flex and SR-R
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061024, COMPAIR Steel flow 150 Pipe set for trough ventilator, galvanised steel
€92.35*
DescriptionSTEEL flow SF 150 pipe set for hob extractors, galvanised steelThe COMPAIR® STEEL flow SF 150 pipe set enables a flexible and space-saving arrangement of the exhaust air pipes for extractor bonnets. It has been specially developed for extractor fans and can be used in flooring, screed or concrete. Installed underfloor heating poses no problem. Due to its flat design and the variably integrated centre bar, it has a high impact load of up to 100 kg. It can also be laid freely on the floor or under the kitchen ceiling. The pipe system is made of galvanised steel and is therefore non-combustible. It is compatible with all elements of the COMPAIR® flow system and is 100 per cent recyclable. The connection dimension of 222 x 89 mm is intended for direct connection to the extractor system. Its guide direction can be varied from left to right by simply repositioning it. The connecting element is suitable for the SF-VRO flex and SF-VRO flat ducts made of aluminium or galvanised steel, which are available separately.The duct set allows a space-saving arrangement of the exhaust air ducts for extractor bonnets with downdraft or hob ventilation.- Connection dimension (222 x 89 mm) for direct connection to the extractor system- Guide direction (left/right) can be varied by repositioning- Suitable for SF-VRO flex and SF-VRO flat ducts
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061025, foam tape, polyethylene foam, grey
€8.35*
DescriptionSTEEL flow foam tape, polyethylene foam, greyThe COMPAIR® STEEL flow foam tape is suitable for connecting the metal duct system to bonnet spigots. It can also be used to prevent structure-borne noise. Made from polyethylene foam, the adhesive tape impresses with its optimum sealing properties as well as its high flexibility and mouldability. The grey sealing tape has a total length of 20 m.- For use when connecting the metal duct system to bonnet supports- to prevent structure-borne noise- 4 mm x 15 mm x 20 m (H x W x L)
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4061026, STEEL flow insulating hose, aluminium laminated
€20.95*
Description: STEEL flowSTEEL flow insulating hose, aluminium laminatedThe flexible COMPAIR® STEEL flow insulating hose reduces loud noises within the recirculation extractor system and protects against excessive heat build-up. It is compatible with the SF-VRO flex flat duct pipes and SR-R flex round duct pipes with a diameter of 150 mm from the COMPAIR® STEEL flow programme. The insulation is aluminium-laminated and has a thermal conductivity of 0.038 W/(mK) and a thermal resistance of 1.3 (K*m²)/W. The tube is 50 mm thick and 100 cm long.- Thickness 50 mm- Length 1000 mm- λ = 0.038 W/(m-K) (thermal conductivity)- R = 1.3 (m²-K)/W (thermal resistance)- Suitable for SF-VRO flex, SF-VRO and SR-R flex
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com