Ventilation technology Naber
Tip
Naber 4010500, System 100 wall connection piece 1, white
€20.95*
Description100 Wall connection piece 1, whiteThe COMPAIR® norm 100 wall connection piece 1 is intended for use in chimney shafts and enables a connection between the pipe and the wall opening. It is suitable for connection to a round pipe with a diameter of 100 mm. The connection is equipped with a backflow flap to prevent air from the outside area getting through the pipe.For use in chimney shafts. For connection to round pipe.- With backflow flap- Hose/pipe connection Ø 100 mm
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011002, N-UR 8 System 100 deflector 90°, white
€13.60*
DescriptionN-UR 8 System 100 deflector 90°, whiteThe flexible COMPAIR® norm N-UR 8 System 100 deflector enables a flat duct to be easily connected to a round duct or flexible duct. At the same time, it provides a 90° vertical bend to create a change of direction within the extract or supply air duct in the kitchen. The moulded part is suitable for connecting flat ducts with a cross-section of 108 x 55 mm with a socket and round ducts with a diameter of 150 mm. For this purpose, it is equipped with an 80 mm long spigot.With 80 mm spigot for connection to round duct or flexible duct.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011003, N-UR 100 deflector 90°, white
€11.50*
DescriptionN-UR 100 deflector 90°, whiteThe COMPAIR® norm N-UR 100 deflector 90° is a solid quality moulded part for the direct connection of a bonnet to the exhaust air installation. Thanks to the integrated condensation barrier, the moisture contained in the vapour is prevented from flowing back to the bonnet. The ventilation moulding can be quickly connected to the required elements of the COMPAIR® norm series by means of simple, tool-free plug-in assembly.For direct bonnet connection, with condensation barrier.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011005, N-VRM 100 Ventilation pipe with sleeve, white, L 1000 mm
€17.80*
Description: N-VRMN-VRM 100 ventilation duct with sleeve, white, L 1000 mmThe COMPAIR® norm N-VRM 100 ventilation pipe is a flexible solution for optimised exhaust and supply air installations in the kitchen. At the same time, the ventilation moulding scores with its simple plug-in installation. This is guaranteed thanks to the integrated socket in the size 108.6 x 55.6 mm. The white flat duct pipe has a length of 100 cm and can be combined with any other system components from the COMPAIR® norm series.With moulded sleeve.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011010, N-RVB 100 pipe connector, white
€8.35*
DescriptionN-RVB 100 pipe connector, whiteWith the straight COMPAIR® norm N-RVB 100 pipe connector, two flat duct pipes can be easily joined together without a sleeve in the kitchen exhaust and supply air installation. The connecting element creates a secure transition without flow losses. It is suitable for flat ducts with a cross-section of 108.6 x 55.6 mm. The white ventilation moulding has a length of 71.5 mm. The connector is held in position thanks to the integrated curved stop in the centre.For straight ventilation ducts.- Length 71.5 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011011, N-RBH 100 Pipe bend horizontal 90°, white
€14.65*
DescriptionN-RBH 100 horizontal 90° pipe bend, whiteThe horizontal COMPAIR® norm N-RBH 100 pipe bend allows two flat duct pipes to be easily joined together with a 90° change in direction. In this way, the extract or supply air routing in the kitchen can be customised. The white plastic ventilation fitting is equipped with a 108.6 x 55.6 mm socket moulded on one side. It can be combined with any other components from the COMPAIR® norm programme.With moulded sleeve on one side.
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011012, N-RBV 100 pipe bend vertical 90°, white
€14.65*
DescriptionN-RBV 100 vertical 90° pipe bend, whiteThe vertical COMPAIR® norm N-RBV 100 pipe bend is used to connect flat duct pipes in the extract or supply air installation for the kitchen. The 90° angle enables a change of direction. The ventilation moulding combines uncomplicated plug-in installation and reduces flow losses within the exhaust air system thanks to the secure connection. It is equipped with a moulded socket on one side and offers a connection size of 108.6 x 55.6 mm.With moulded socket on one side.
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011014, N-UR 100 deflector 90° with round tube, white, L 500 mm
€20.95*
DescriptionN-UR 100 deflector 90° with round duct, white, L 500 mmThe COMPAIR® norm N-UR 100 deflector 90° with round duct is used to integrate a bonnet into the exhaust air installation. Thanks to the integrated deflector technology, an optimised flow volume is created even when changing direction, so that exhaust air is efficiently discharged to the outside. In order to fully utilise the advantages mentioned, the use of the fitting with round duct for the bonnet connection is always recommended if the technical requirements are met. Variants with different pipe lengths are available.With air deflectors and round pipe.To achieve optimum flow performance, always use the deflectors with round pipe.Only use the deflectors with hose (N-URX) in exceptional cases when there is no other technical option.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011015, N-UR 100 deflector 90° with round tube, white, L 900 mm
€23.10*
DescriptionN-UR 100 deflector 90° with round pipe, white, L 900 mmThe COMPAIR® norm N-UR 100 deflector 90° with round duct is used to integrate a bonnet into the exhaust air installation. Thanks to the integrated deflector technology, an optimised flow volume is created even when the direction is changed, so that exhaust air is efficiently discharged to the outside. In order to fully utilise the advantages mentioned, the use of the fitting with round duct for the bonnet connection is always recommended if the technical requirements are met. Variants with different pipe lengths are available.With air deflectors and round pipe.To achieve optimum flow performance, always use the deflectors with round pipe.Only use the deflectors with hose (N-URX) in exceptional cases when there is no other technical option.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011018, round tube 100, white, L 350 mm
€7.30*
Tube descriptionRound duct 100, white, L 350 mmThe high-quality COMPAIR® norm round duct 100 is part of a varied programme for exhaust air installation in the kitchen. With an internal diameter of 100 mm, it is compatible with other basic elements in the range. The ventilation duct is available in various lengths to suit requirements. Hose clamps with a suitable nominal diameter are available as optional accessories to securely connect round flexible hoses to the pipe.- Round duct Ø 100 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011019, round tube 100, white, L 500 mm
€8.35*
Tube descriptionRound duct 100, white, L 500 mmThe high-quality COMPAIR® norm round duct 100 is part of a varied programme for exhaust air installation in the kitchen. With an internal diameter of 100 mm, it is compatible with other basic elements in the range. The ventilation duct is available in various lengths to suit requirements. Hose clamps with a suitable nominal diameter are available as optional accessories to securely connect round flexible hoses to the pipe.- Round duct Ø 100 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011020, round tube 100, white, L 900 mm
€14.35*
Tube descriptionRound duct 100, white, L 900 mmThe high-quality COMPAIR® norm round duct 100 is part of a varied programme for exhaust air installation in the kitchen. With an internal diameter of 100 mm, it is compatible with other basic elements in the range. The ventilation duct is available in various lengths to suit requirements. Hose clamps with a suitable nominal diameter are available as optional accessories to securely connect round flexible hoses to the pipe.- Round duct Ø 100 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011021, N-URX 100 deflector 90° with flexible hose, white, L 500 mm
€25.15*
DescriptionN-URX 100 deflector 90° with flexible duct, white, L 500 mmThe COMPAIR® norm N-URX 100 deflector 90° with flexible duct is used to connect the bonnet to the exhaust air system. Equipped with a flexible connecting hose, the ventilation moulding is always used when no other solution is available. In all other cases, the N-UR 100 deflector 90° with round duct is recommended for the bonnet connection in order to fully utilise the benefits of the guide element technology. The flexible duct is attached using the two hose clamps included in the set.With 500 mm/1000 mm flexible duct and 2 hose clamps.
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011022, N-URX 100 deflector 90° with flexible hose, white, L 1000 mm
€28.30*
DescriptionN-URX 100 deflector 90° with flexible duct, white, L 1000 mmThe COMPAIR® norm N-URX 100 deflector 90° with flexible duct is used to connect the bonnet to the exhaust air system. Equipped with a flexible connecting hose, the ventilation moulding is always used when no other solution is available. In all other cases, the N-UR 100 deflector 90° with round duct is recommended for the bonnet connection in order to fully utilise the benefits of the guide element technology. The flexible duct is attached using the two hose clamps included in the set.With 500 mm/1000 mm flexible duct and 2 hose clamps.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011023, N-EST 100 end piece, white
€17.50*
DescriptionN-EST 100 end piece, whiteThe COMPAIR® norm N-EST 100 end piece with a direct transition from flat to round is used on the wall duct of the exhaust air installation. The connecting element is equipped with a moulded sleeve for simple and tool-free installation. The round outlet has a diameter of 100 mm to match the K-Klima-R 100/100 wall conduct.With moulded sleeve for direct transition from flat to round (wall duct).
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011026, backflow flap 100, Ø 100 mm, L 43 mm
€26.20*
Description: Backflow flapRound backflow flap, Ø 100 mm, L 43 mmThe COMPAIR® backdraft flap with a round, elegant look prevents air and wind from entering the kitchen through the ventilation duct. Thanks to its galvanised surface, the non-return damper is weather-resistant, robust and durable. It cannot be used for installation in a vertical duct. Various diameters and lengths are available.Not suitable for installation in a vertical pipe.- Galvanised
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011027, N-VBS 100 pipe connector, round, white
€7.30*
DescriptionN-VBS 100 round pipe connector, whiteThe COMPAIR® norm N-VBS 100 round pipe connector is part of a range of flexible system solutions. It serves as a connecting element to adapt the ventilation duct to individual requirements. With a diameter of 100 mm and a length of 50 mm, the hose and pipe connector is compatible with the basic parts in the range. It is characterised by its high efficiency thanks to the integrated guide element technology.- Hose/pipe socket Ø 100 mm- Length 50 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011038, hose clamp 102, Ø 102, nominal width 90 - 110 mm
€6.25*
Hose clamp descriptionHose clamp, Ø 102, nominal width 90-110 mmWith the COMPAIR® hose clamp, ventilation ducts can be reliably fastened to the connection. Made from galvanised steel wire, it is particularly robust and permanently corrosion-resistant. The hose clamp has a bandwidth of 12 mm. Various diameters and nominal widths are available.Clamp made of galvanised steel wire.- Aluminium coloured- 12 mm band width
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011045, Flat trunking support 100, stainless steel
€6.77*
Description Flat duct bracketFlat duct bracket 100, stainless steelThe COMPAIR® norm flat duct bracket 100 is suitable for the reliable installation of exposed ducts and hoses with a diameter of 100 mm on the wall or ceiling. Made from high-quality stainless steel, it is extremely robust and durable. The bracket is provided with screw holes for easy attachment.For secure wall/ceiling mounting of exposed ducts and hoses.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011048, RDZ flow 125/150 reducer
€10.50*
DescriptionRDZ flow reducer, Ø 125/150 mm, whiteThe COMPAIR® RDZ flow reducer can be used to reduce the diameter of the round duct. Sharp-edged stalls are avoided for optimised flow guidance. The connecting element is suitable for reversible installation. There is a choice of different variants that allow the diameter to be reduced from 125 mm to 100 mm and from 150 mm to 125 mm.For the transition from Ø 125 mm to Ø 100 mm round tube or Ø 150 mm to Ø 125 mm round tube. Reversible installation possible. Flow-optimised design by avoiding sharp-edged stalls.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011049, RDZ flow 100/125 reducer, white
€10.50*
DescriptionRDZ flow reducer, Ø 100/125 mm, whiteThe COMPAIR® RDZ flow reducer can be used to reduce the diameter of the round duct. Sharp-edged stalls are avoided for optimised flow guidance. The connecting element is suitable for reversible installation. There is a choice of different variants that allow the diameter to be reduced from 125 mm to 100 mm and from 150 mm to 125 mm.For the transition from Ø 125 mm to Ø 100 mm round tube or Ø 150 mm to Ø 125 mm round tube. Reversible installation possible. Flow-optimised design by avoiding sharp-edged stalls.
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011076, E-Jal 100 external venetian blind, white
€10.40*
Description: K-JalK-Jal 100 external louvre, whiteThe COMPAIR® flow K-Jal 100 external louvre is used to close off the exhaust air system and impresses with its modern appearance. With its stylish louvre design, it gives the façade an elegant accent. At the same time, the louvres regulate the air flow and protect against the effects of the weather. The louvre vent has a backdraft damper for connection to a round duct with a diameter of 100 mm. Various colour variants are available to match the house façade.190 x 190 mm, with backflow flap for connection to round duct.- Ø 100 mm- Socket depth 71 mm
Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011079, K-Klima-R 100/100 wall conduct, white
€50.35*
DescriptionK-Klima-R 100/100 wall conduct, whiteThe COMPAIR® norm K-Klima-R 100/100 wall conduct is a modern solution for exhaust air installation and connects indoor and outdoor areas as a wall duct. It is part of the COMPAIR® norm air duct system, which enables permanently low dynamic pressure exhaust air ducting in the kitchen. The wall duct is suitable for a round duct connection with a length of 350 mm. A wall opening of approx. 103 mm is required for the pipe diameter of 100 mm. The pipe is telescopic so that the length of the feed-through can be individually adjusted from 420-620 mm depending on the wall thickness. The telescopic wall conduct is fitted with a backflow flap to prevent air from outside being forced through the pipe into the kitchen. The high-quality external louvre in a louvre design provides reliable protection from the weather and gives the telescopic wall duct a modern look. There is a choice of different colour variants.With backflow flap, telescopic pipe and external louvre.- Round pipe with 350 mm length- Pipe socket Ø 100 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 103 mm
Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com
Tip
Naber 4011081, K-Klima-R 100/100 Mauerkasten, ziegelrot
€29.95*
BeschreibungK-Klima-R 100/100 Mauerkasten, ziegelrotDer COMPAIR® norm K-Klima-R 100/100 Mauerkasten ist eine moderne Lösung zur Abluftinstallation und verbindet als Wanddurchführung den Innen- und Außenbereich. Er ist Teil des COMPAIR® norm Luftkanalsystems, das eine dauerhaft staudruckarme Abluftführung in der Küche ermöglicht. Geeignet ist die Mauerdurchführung für einen Rundrohranschluss mit der Länge von 350 mm. Für den Rohrdurchmesser von 100 mm wird ein Wanddurchbruch von ca. 103 mm benötigt. Das Rohr ist teleskopierbar, sodass die Länge der Durchführung individuell je nach Wandstärke von 420-620 mm angepasst werden kann. Damit keine Luft von außen durch das Rohr in die Küche gedrückt wird, ist der Teleskop-Mauerkasten mit einer Rückstauklappe versehen. Die hochwertige Außenjalousie im Lamellendesign schützt zuverlässig vor Witterungseinflüssen und verleiht der teleskopierbaren Mauerdurchführung ein modernes Aussehen. Zur Auswahl stehen unterschiedliche Farbvarianten.Mit Rückstauklappe, Teleskoprohr und Außenjalousie.— Rundrohr mit 350 mm Länge— Rohrstutzen-Ø 100 mm— Stutzentiefe 24 mm— Einbautiefe 420–620 mm, kürzbar bis 100 mm— Wanddurchbruch-Ø ca. 103 mm