Wall boxes

DescriptionK-Klima-R 100/100 wall conduct, whiteThe COMPAIR® norm K-Klima-R 100/100 wall conduct is a modern solution for exhaust air installation and connects indoor and outdoor areas as a wall duct. It is part of the COMPAIR® norm air duct system, which enables permanently low dynamic pressure exhaust air ducting in the kitchen. The wall duct is suitable for a round duct connection with a length of 350 mm. A wall opening of approx. 103 mm is required for the pipe diameter of 100 mm. The pipe is telescopic so that the length of the feed-through can be individually adjusted from 420-620 mm depending on the wall thickness. The telescopic wall conduct is fitted with a backflow flap to prevent air from outside being forced through the pipe into the kitchen. The high-quality external louvre in a louvre design provides reliable protection from the weather and gives the telescopic wall duct a modern look. There is a choice of different colour variants.With backflow flap, telescopic pipe and external louvre.- Round pipe with 350 mm length- Pipe socket Ø 100 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 103 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

BeschreibungK-Klima-R 100/100 Mauerkasten, ziegelrotDer COMPAIR® norm K-Klima-R 100/100 Mauerkasten ist eine moderne Lösung zur Abluftinstallation und verbindet als Wanddurchführung den Innen- und Außenbereich. Er ist Teil des COMPAIR® norm Luftkanalsystems, das eine dauerhaft staudruck­arme Abluftführung in der Küche ermöglicht. Geeignet ist die Mauerdurchführung für einen Rundrohranschluss mit der Länge von 350 mm. Für den Rohrdurchmesser von 100 mm wird ein Wanddurchbruch von ca. 103 mm benötigt. Das Rohr ist teleskopierbar, sodass die Länge der Durchführung individuell je nach Wandstärke von 420-620 mm angepasst werden kann. Damit keine Luft von außen durch das Rohr in die Küche gedrückt wird, ist der Teleskop-Mauerkasten mit einer Rückstauklappe versehen. Die hochwertige Außenjalousie im Lamellendesign schützt zuverlässig vor Witterungseinflüssen und verleiht der teleskopierbaren Mauerdurchführung ein modernes Aussehen. Zur Auswahl stehen unterschiedliche Farbvarianten.Mit Rückstauklappe, Teleskoprohr und Außenjalousie.— Rundrohr mit 350 mm Länge— Rohrstutzen-Ø 100 mm— Stutzentiefe 24 mm— Einbautiefe 420–620 mm, kürzbar bis 100 mm— Wanddurchbruch-Ø ca. 103 mm

DescriptionK-Klima-R 125/125 wall conduct, whiteThe COMPAIR® flow K-Klima-R 125/125 wall conduct provides an effective wall duct for the exhaust air system. Thanks to the patented COMPAIR® flow air duct system with integrated air guide elements in transition pieces and horizontal bends, the exhaust air is transported to the outside quietly and with low pressure loss. The wall duct is suitable for connecting round ducts. With a pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the feed-through can be adjusted from 420-620 mm depending on the wall thickness. The pipe can also be easily shortened to a length of up to 100 mm. The existing backflow flap prevents air from outside entering the kitchen through the pipe. For additional protection against the weather, the telescopic wall duct is fitted with a high-quality external louvre in a louvre design. As it is available in several colours, it offers scope for personal design preferences.With backflow flap, telescopic pipe and external louvre.- Hose/pipe socket Ø 125 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R 125/125 wall conduct, brick redThe COMPAIR® flow K-Klima-R 125/125 wall conduct provides an effective wall duct for the exhaust air system. Thanks to the patented COMPAIR® flow air duct system with integrated air guide elements in transition pieces and horizontal bends, the exhaust air is transported to the outside quietly and with low pressure loss. The wall duct is suitable for connecting round ducts. With a pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the feed-through can be adjusted from 420-620 mm depending on the wall thickness. The pipe can also be easily shortened to a length of up to 100 mm. The existing backflow flap prevents air from outside entering the kitchen through the pipe. For additional protection against the weather, the telescopic wall duct is fitted with a high-quality external louvre in a louvre design. As it is available in several colours, it offers scope for personal design preferences.With backflow flap, telescopic pipe and external louvre.- Hose/pipe socket Ø 125 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R 125/125 wall conduct, light greyThe COMPAIR® flow K-Klima-R 125/125 wall conduct provides an effective wall duct for the exhaust air system. Thanks to the patented COMPAIR® flow air duct system with integrated air guide elements in transition pieces and horizontal bends, the exhaust air is transported to the outside quietly and with low pressure loss. The wall duct is suitable for connecting round ducts. With a pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the feed-through can be adjusted from 420-620 mm depending on the wall thickness. The pipe can also be easily shortened to a length of up to 100 mm. The existing backflow flap prevents air from outside entering the kitchen through the pipe. For additional protection against the weather, the telescopic wall duct is fitted with a high-quality external louvre in a louvre design. As it is available in several colours, it offers scope for personal design preferences.With backflow flap, telescopic pipe and external louvre.- Hose/pipe socket Ø 125 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R 125/125 wall conduct, anthraciteThe COMPAIR® flow K-Klima-R 125/125 wall conduct provides an effective wall duct for the exhaust air system. Thanks to the patented COMPAIR® flow air duct system with integrated air guide elements in transition pieces and horizontal bends, the exhaust air is transported quietly and with low pressure loss to the outside. The wall duct is suitable for connecting round ducts. With a pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the feed-through can be adjusted from 420-620 mm depending on the wall thickness. The pipe can also be easily shortened to a length of up to 100 mm. The existing backflow flap prevents air from outside entering the kitchen through the pipe. For additional protection against the weather, the telescopic wall duct is fitted with a high-quality external louvre in a louvre design. As it is available in several colours, it offers scope for personal design preferences.With backflow flap, telescopic pipe and external louvre.- Hose/pipe socket Ø 125 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 100 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionT-GILÜF 4 System 125 wide duct wall sleeve, whiteWith T-GILÜF external grille cover, wide duct telescopic sliding element, inwardly offset backflow flap and internal cover frame.- Wall opening approx. 60 x 225 mm- Installation depth 550-750 mm

Description: E-JalE-Jal Col® flow 125 wall conduct incl. THERMOBOX, white, stainless steelThe variable COMPAIR® flow E-Jal Col® flow 125 wall conduct impresses with its energy-efficient performance. It reliably discharges the exhaust air from an extractor bonnet to the outside and ensures a favourable indoor climate in the kitchen. The wall conduct is equipped with a THERMOBOX and provides a square stainless steel external louvre. The slats of the louvre are fitted with special baffles that optimise the air flow. The patented COMPAIR® flow technology is used for efficient and quiet air duct guidance. In combination with the integrated THERMOBOX, the system suppresses the ingress of draughts and significant heat loss. The blower door-certified heat retention system opens at an air pressure of 65 Pa and offers complete opening even at a low volume flow. It opens and closes magnetically and avoids unsightly vibrations and rattling noises. The telescopic wall duct provides a flat spigot measuring 174 x 82 mm with a spigot depth of 80 mm for connection. The total installation depth can be varied from 350 to 500 mm and can be shortened to up to 240 mm. The required wall opening is 132 mm in diameter.Wall conduct with telescopic pipe, incl. built-in THERMOBOX heat retention system and Stainless steel external louvre E-Jal Col®. Guide elements on the louvre blades ensure optimised air flow.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 350-500 mm, can be shortened to 240 mm- Wall opening Ø approx. 132 mm- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

DescriptionKlima-E 150 wall conduct, white, stainless steelThe COMPAIR® flow Klima-E 150 wall conduct is installed in the wall to channel the exhaust air from the kitchen to the outside in a controlled manner via an air duct. Its COMPAIR® flow system with guide vane technology has a high air flow rate and quietly guides the vapours around the bends to the outside with minimal pressure loss. The exhaust air wall conduct is equipped with a round pipe for connection. With a diameter of 150 mm, a wall opening of approx. 155 mm is required. The telescopic pipe allows the length of the duct to be customised from 420-620 mm. The length of the pipe can be shortened to 175 mm. To prevent the ingress of air or odours from outside, the telescopic wall conduct has a backflow flap. A high-quality external louvre rounds off the wall duct and provides protection from the weather. The stylish stainless steel louvre design not only meets visual requirements, but is also characterised by high stability and durability.Telescopic pipe and stainless steel external louvre, with backflow flap.- Hose/pipe socket Ø 150 mm- Socket depth 24 mm- Installation depth 420-620 mm, can be shortened to 175 mm- Wall opening Ø approx. 155 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

DescriptionKlima-E flow 150 wall conduct, white, stainless steelThe COMPAIR® Klima-E flow 150 wall conduct is used to connect the exhaust air duct and efficiently channels the exhaust air from the kitchen through the wall. It is part of the COMPAIR® flow air duct system, which is characterised by high air performance and low operating noise. The integrated guide vane technology smoothes the vapours in the duct and guides them to the outside with low pressure losses. The exhaust air wall conduct is equipped with a rectangular holder measuring 227 x 94 mm for a flat duct connection. The telescopic pipe allows the length of the duct to be individually adjusted from 420-620 mm depending on the wall thickness. If necessary, the pipe can be shortened to a maximum length of 210 mm. The standard pipe diameter is 150 mm, which provides a wall opening of approx. 155 mm. To prevent air from outside entering the kitchen through the pipe, the wall duct has a backflow flap. Additional protection from the weather is provided by the external louvre, which forms the outer closure. The high-quality stainless steel louvre design is particularly robust and durable.Stainless steel external louvre with backflow flap.With rectangular support for COMPAIR® flow 150.- Pipe spigot 227 x 94 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 210 mm- Wall opening Ø approx. 155 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionE-Klima-E 150 wall conduct, stainless steelWith the COMPAIR® flow E-Klima-E 150 wall conduct, exhaust air from the kitchen can be efficiently channelled outside. It is part of the patented COMPAIR® flow air duct system and, thanks to the guide element technology, channels the vapours to the outside quietly and with minimal flow loss. The exhaust air wall conduct is suitable for a round pipe connection and, with its pipe diameter of 150 mm, requires a wall opening of approx. 155 mm. With its total length of 500 mm and the sliding element of 120 mm, the length of the duct can be adjusted from 500-600 mm depending on the wall thickness. If required, the pipe can be shortened to a maximum length of 175 mm. The practical backflow flap reliably prevents air from outside entering the kitchen through the pipe. The high-quality, robust external louvre in louvre design ensures optimum flow performance and protection from the weather. Made from durable stainless steel, it has a high-quality, stylish look and impresses with its high stability.Stainless steel pipe 500 mm long, 120 mm sliding element and stainless steel external louvre, with backflow flap.- Hose/pipe socket Ø 150 mm- Wall opening Ø approx. 155 mm- Installation depth 500-600 mm, can be shortened to 175 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Description: E-JalE-Jal Col® 125 wall conduct incl. THERMOBOX, white, stainless steelThe telescopic COMPAIR® flow E-Jal Col® 125 wall conduct creates a pleasant room climate when using an extractor bonnet in the kitchen. Equipped with a THERMOBOX, the wall conduct offers additional convenience. The exhaust air wall conduct also features the E-Jal Col® stainless steel external louvre. Special guide elements on the louvre blades ensure optimised air flow. This ensures that vapours are reliably conveyed to the outside. The wall duct is part of the patented COMPAIR® flow air duct system, which achieves an energy-efficient and quiet air flow through insulated guide vanes. The associated THERMOBOX is also an innovative heat retention system that prevents draughts from outside and is characterised by a 20-fold reduction in heat loss compared to standard systems. It opens at a pressure of 65 Pa and enables magnetic opening and closing without rattling noises or vibrations. The insulation system also impresses with its blower door certification. The connection is made via a round duct with a diameter of 125 mm. The connection piece depth is 24 mm. The total installation depth of the variable wall duct can be adjusted from 350 to 500 mm and shortened to 205 mm if required. A wall opening with a diameter of 132 mm is required for installation.Wall conduct with telescopic pipe, incl. built-in THERMOBOX heat retention system and Stainless steel external louvre E-Jal Col®. Guide elements on the louvre blades ensure optimised flow guidance.- Hose/pipe spigot Ø 125 mm- Spigot depth 24 mm- Installation depth 350-500 mm, can be shortened to 205 mm- Wall opening Ø approx. 132 mm- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

DescriptionKlima-E flow 125 wall conduct, white, stainless steelThe COMPAIR® flow Klima-E flow 125 wall conduct ensures effective kitchen ventilation and directs the exhaust air outwards through the wall via the air duct of the patented COMPAIR® flow system. Thanks to integrated air deflectors in transition pieces and horizontal bends, the air flows around the bends in an energy-efficient and quiet manner with minimal flow loss. The telescopic wall conduct has a rectangular holder measuring 174 x 82 mm for a flat duct connection. The length of the duct can be individually adjusted from 420-620 mm using the telescopic pipe, depending on the wall thickness. The pipe is also customisable and can be shortened to a length of 210 mm. A wall opening of approx. 132 mm is required for the pipe diameter of 125 mm. To regulate the air flow, the exhaust air wall conduct is equipped with a backflow flap. This prevents air from outside flowing through the pipe into the kitchen. The high-quality stainless steel external louvre in a louvre design provides additional protection from the weather.Telescopic pipe and Stainless steel external louvre, with backflow flap. With rectangular holder for COMPAIR® flow 125.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 210 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R flow 125 wall conduct, whiteThe COMPAIR® flow K-Klima-R flow 125 wall conduct serves as a connection between the indoor and outdoor areas to direct the exhaust air from the extractor bonnet to the outside. As it is a component of the patented COMPAIR® flow air duct system, the air is transported to the outside in an energy-efficient, quiet manner and with low flow losses using integrated air deflectors. The telescopic wall duct has a rectangular mount measuring 174 x 82 mm for a flat duct connection. The duct diameter is 125 mm, which means that a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the duct can be adjusted from 420-620 mm depending on the wall thickness. The duct itself is also flexible and can be shortened to a length of up to 135 mm. To prevent air flows in the opposite direction, the exhaust air wall conduct is equipped with a backflow flap. The high-quality, robust external louvre in a louvre design provides additional protection against the weather. Several colour variants can be selected to suit your personal taste.With backflow flap and external louvre. With rectangular holder for COMPAIR® flow 125.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 135 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R flow 125 wall conduct, brick redThe COMPAIR® flow K-Klima-R flow 125 wall conduct serves as a connection between the indoor and outdoor areas to direct the exhaust air from the extractor bonnet to the outside. As it is a component of the patented COMPAIR® flow air duct system, the air is transported to the outside in an energy-efficient, quiet manner and with low flow losses using integrated air deflectors. The telescopic wall duct has a rectangular mount measuring 174 x 82 mm for a flat duct connection. The duct diameter is 125 mm, which means that a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the duct can be adjusted from 420-620 mm depending on the wall thickness. The duct itself is also flexible and can be shortened to a length of up to 135 mm. To prevent air flows in the opposite direction, the exhaust air wall conduct is equipped with a backflow flap. The high-quality, robust external louvre in a louvre design provides additional protection against the weather. Several colour variants can be selected to suit your personal taste.With backflow flap and external louvre. With rectangular holder for COMPAIR® flow 125.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 135 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R flow 125 wall conduct, light greyThe COMPAIR® flow K-Klima-R flow 125 wall conduct serves as a connection between the indoor and outdoor areas to direct the exhaust air from the extractor bonnet to the outside. As it is a component of the patented COMPAIR® flow air duct system, the air is transported to the outside in an energy-efficient, quiet manner and with low flow losses using integrated air deflectors. The telescopic wall duct has a rectangular mount measuring 174 x 82 mm for a flat duct connection. The duct diameter is 125 mm, which means that a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the duct can be adjusted from 420-620 mm depending on the wall thickness. The duct itself is also flexible and can be shortened to a length of up to 135 mm. To prevent air flows in the opposite direction, the exhaust air wall conduct is equipped with a backflow flap. The high-quality, robust external louvre in a louvre design provides additional protection against the weather. Several colour variants can be selected according to personal taste.With backflow flap and external louvre. With rectangular holder for COMPAIR® flow 125.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 135 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionK-Klima-R flow 125 wall conduct, anthraciteThe COMPAIR® flow K-Klima-R flow 125 wall conduct serves as a connection between the indoor and outdoor areas to direct the exhaust air from the extractor bonnet to the outside. As it is a component of the patented COMPAIR® flow air duct system, the air is transported to the outside in an energy-efficient, quiet manner and with low flow losses using integrated air deflectors. The telescopic wall duct has a rectangular mount measuring 174 x 82 mm for a flat duct connection. The duct diameter is 125 mm, which means that a wall opening of approx. 132 mm is required. Thanks to the telescopic pipe, the length of the duct can be adjusted from 420-620 mm depending on the wall thickness. The duct itself is also flexible and can be shortened to a length of up to 135 mm. To prevent air flows in the opposite direction, the exhaust air wall conduct is equipped with a backflow flap. The high-quality, robust external louvre in a louvre design provides additional protection against the weather. Several colour variants can be selected according to personal taste.With backflow flap and external louvre. With rectangular holder for COMPAIR® flow 125.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 420-620 mm, can be shortened to 135 mm- Wall opening Ø approx. 132 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Descriptionflow Star GTS 125 wall conduct, white, stainless steelThe COMPAIR® flow Star GTS 125 wall conduct efficiently and quietly conducts exhaust air and odours from the kitchen to the outside area and is installed directly in the outer wall for this purpose. The COMPAIR® flow air duct system with integrated guide element technology is characterised by optimum flow behaviour and low pressure losses. Due to the large flow cross-section, a high level of energy is generated, which is effectively absorbed by an additionally installed compression spring. The exhaust air wall conduct can be opened and closed easily using spring force and magnets. It has a connection for a round duct with a diameter of 125 mm. With a core drill hole and wall aperture of approx. 132 mm, the wall sleeve can be installed reliably and securely. The length of the duct can be adjusted from 314-550 mm depending on the wall thickness. If required, the pipe of the telescopic wall duct can be shortened to a maximum length of 250 mm. For a modern and flush external appearance, the wall duct is equipped with a round external cover made of high-quality stainless steel.With connection to round pipe Ø 125 mm and round stainless steel outer cover.- Required opening pressure 100 Pa- Stainless steel cover-Ø 197 mm- Hose/pipe spigot Ø 125 mm, spigot depth 24 mm- Installation depth 314-550 mm, can be shortened to 250 mm, wall opening-Ø approx. 132 mm- A core hole (Ø 132 mm) is recommended for the installation of the support pipe Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Descriptionflow Star GTS 125 F wall conduct, white, stainless steelThe COMPAIR® flow Star GTS 125 F wall conduct is used as a wall duct in ventilation technology and is suitable for discharging exhaust air to the outside. The baffle technology used creates an optimised flow pattern with high performance and minimal pressure losses. The high energy caused by the large flow cross-section is reliably absorbed by the additionally installed compression spring. The exhaust air wall conduct has spring force and additional magnets for easy opening and closing. It is equipped with a 174 mm x 82 mm rectangular support for connecting a rectangular duct. Due to the pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. The support pipe can be reliably installed with a core drill hole. As the wall duct is telescopic, the length of the duct can be adjusted from 314-550 mm depending on the wall thickness. The pipe can be shortened to a size of 285 mm according to individual requirements. For the outer finish, the wall duct has a round outer cover made of stainless steel, which gives it an elegant appearance and also scores points for its high stability.With connection to COMPAIR® flow 125 rectangular duct and round stainless steel outer cover.- Required opening pressure 100 Pa- Stainless steel cover Ø 197 mm- Pipe spigot 174 x 82 mm, spigot depth 80 mm- Installation depth 314-550 mm, can be shortened to 285 mm, wall opening Ø approx. 132 mm- A core hole (Ø 132 mm) is recommended for the installation of the support pipe Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description E-JalE-Jal Col® flow 125 wall conduct incl. THERMOBOX, white, stainless steelThe variable COMPAIR® flow E-Jal Col® flow 125 wall conduct impresses with its energy-efficient performance. It reliably discharges the exhaust air from an extractor bonnet to the outside and ensures a favourable indoor climate in the kitchen. The wall conduct is equipped with a THERMOBOX and provides a square stainless steel external louvre. The slats of the louvre are fitted with special baffles that optimise the air flow. The patented COMPAIR® flow technology is used for efficient and quiet air duct guidance. In combination with the integrated THERMOBOX, the system suppresses the ingress of draughts and significant heat loss. The blower door-certified heat retention system opens at an air pressure of 65 Pa and offers complete opening even at a low volume flow. It opens and closes magnetically and avoids unsightly vibrations and rattling noises. The telescopic wall duct provides a flat spigot measuring 174 x 82 mm with a spigot depth of 80 mm for connection. The total installation depth can be varied from 350 to 500 mm and can be shortened to up to 240 mm. The required wall opening is 132 mm in diameter.Wall conduct with telescopic pipe, incl. built-in THERMOBOX heat retention system and Stainless steel external louvre E-Jal Col®. Guide elements on the louvre blades ensure optimised air flow.- Pipe spigot 174 x 82 mm- Spigot depth 80 mm- Installation depth 350-500 mm, can be shortened to 240 mm- Wall opening Ø approx. 132 mm- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Descriptionflow Star GTS 150 wall conduct, white, stainless steelThe COMPAIR® flow Star GTS 150 wall conduct ensures efficient extraction of exhaust air and is used to connect indoor and outdoor areas in the wall. The COMPAIR® flow air duct system with guide element technology enables optimum flow behaviour. The system is also characterised by minimal pressure loss and low noise levels. To slow down the flow body, the exhaust air wall conduct has an additional compression spring. It is equipped with a connection to a round pipe with a diameter of 150 mm. A core hole of approx. 155 mm is recommended for the installation of the support pipe. As the pipe is telescopic, the length of the duct can be adjusted from 314-550 mm depending on the wall thickness. If necessary, the pipe can be shortened to a length of up to 250 mm. A round outer cover forms the outer end, giving the wall duct an elegant appearance. Made from high-quality stainless steel, it is extremely durable and robust.With connection to round pipe Ø 150 mm and round stainless steel outer cover.- Required opening pressure 150 Pa- Stainless steel cover-Ø 220 mm- Hose/pipe socket Ø 150 mm, socket depth 24 mm- Installation depth 314-550 mm, can be shortened to 250 mm, wall opening Ø approx. 155 mm- A core hole (Ø 155 mm) is recommended for the installation of the support pipe Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Descriptionflow Star GTS 150 F wall conduct, white, stainless steelThe COMPAIR® flow Star GTS 150 F wall conduct provides an effective wall duct for the kitchen exhaust air system and quietly transports the exhaust air to the outside. The integrated guide vane technology enables optimum flow behaviour and directs the vapours to the outside with minimal pressure loss. The large flow cross-section generates a high level of energy, which is efficiently absorbed by an additional built-in compression spring. The exhaust air wall conduct can be opened and closed easily using spring and magnetic force. It is equipped with a 227 x 94 mm connection to a rectangular pipe. The pipe diameter of 150 mm allows for a wall opening of approx. 155 mm. A core hole is recommended for the installation of the support pipe. The telescopic pipe allows the length of the duct to be adjusted from 314-550 mm depending on the wall thickness. The pipe can be shortened to a length of up to 285 mm. The telescopic wall duct has an elegant appearance thanks to its round outer cover made of high-quality, rustproof stainless steel.With connection to COMPAIR® flow 150 rectangular duct and round stainless steel outer cover.- Required opening pressure 150 Pa- Stainless steel cover Ø 220 mm- Duct spigot 227 x 94 mm, spigot depth 80 mm- Installation depth 314-550 mm, can be shortened to 285 mm, wall opening Ø approx. 155 mm- A core hole (Ø 155 mm) is recommended for the installation of the support pipe Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Product descriptionE-Jal 150 wall conduct incl. THERMOBOX, white, stainless steelThe COMPAIR® flow E-Jal 150 wall conduct with integrated THERMOBOX significantly improves the room climate in conjunction with an extractor bonnet. It reliably guides the exhaust air outside via the air duct. At the same time, the system prevents heat loss in the room and the ingress of cold outside air. The wall conduct is equipped with a telescopic tube that contains the THERMOBOX, an in-built heat retention system. In combination with the E-Jal stainless steel external louvre, this results in high energy efficiency with up to 20 times less heat loss compared to standard non-return dampers. Neither vibrations nor rattling noises are produced. The THERMOBOX, which opens at 65 Pa, is characterised by blower door certification. The wall sleeve including THERMOBOX thus makes an effective contribution to saving energy. The wall conduct is connected to a round pipe via a hose/pipe connection with a diameter of 150 mm. The installation depth of the wall box varies from 350 to 500 mm, whereby the pipe can be shortened to 255 mm - making the duct suitable for various wall thicknesses. A wall opening with a diameter of approx. 155 mm is required for installation.Wall conduct with telescopic pipe, incl. built-in THERMOBOX heat retention system and stainless steel external louvre E-Jal.- Hose/pipe socket Ø 150 mm- Socket depth 24 mm- Installation depth 350-500 mm, can be shortened to 255 mm- Wall opening Ø approx. 155 mm- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Product descriptionE-Jal flow 150 wall conduct incl. THERMOBOX, white, stainless steelThe COMPAIR® flow E-Jal flow 150 wall conduct is an intelligent kitchen ventilation system for the extractor bonnet. It ensures targeted exhaust air transport and improves the indoor climate in the kitchen. This is made possible by the integration of a THERMOBOX and the E-Jal stainless steel external louvre. The telescopic wall duct utilises the innovative COMPAIR® flow air duct system, which creates an energy-efficient and low-noise air flow. An insulated THERMOBOX in the duct prevents draughts from entering. At the same time, the blower door-certified heat retention system effectively protects against unwanted heat loss in the room. With its U-value of just 2.2 W, the ShutterTec retention system ensures excellent insulation values. The exhaust air wall conduct is designed for a flat pipe socket measuring 227 x 94 mm with a socket depth of 80 mm. Overall, installation depths of 350 to 500 mm can be realised with the duct. Shortening to 290 mm is possible. The diameter of the wall opening is 155 mm.Wall conduct with telescopic pipe, incl. built-in THERMOBOX heat retention system and stainless steel external louvre E-Jal.- Pipe spigot 227 x 94 mm- Spigot depth 80 mm- Installation depth 350-500 mm, can be shortened to 290 mm- Wall opening Ø approx. 155 mm- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com