Anschlusskabel

DescriptionNaber kitchen connection box, 1.8 m cable length each, whiteThe ready-to-install kitchen connection box has all the connection cables needed to connect electrical appliances such as a hob or induction hob, an oven and a dishwasher. The junction box measures 45 x 95 x 95 mm (H x W x L) and is screwed and sealed to prevent unauthorised opening. This is an important aspect, as connection and commissioning may only be carried out by qualified electricians. For a general understanding of the design, a printed label shows the internal wiring. The input voltage of the power distributor is 400 V, the maximum back-up fuse is limited to 16 A. Starting from the cooker socket, attention must be paid to the total connected load in kW so that this is not exceeded by the hob and oven power. A dishwasher or washing machine is connected via the pan coupling. For safety reasons, the use of a multiple table socket is not recommended. The Power Splitter is not suitable for installation in damp rooms as it is categorised in protection class IP20.The practical electric kitchen connection is already equipped with all the necessary connection cables for hobs, ovens, dishwashers or induction hobs. Starting from the cooker socket, the electrical appliances in the kitchen can be connected easily and the electrical connection is simple and space-saving.Technical data:- Input voltage 400 V- Back-up fuse max. 16 A- Cable and socket tested in accordance with IEC 60670-1 (DIN EN 60670-1), IEC 60670-22 (DIN EN 60670-22) and IEC 61535 (DIN EN 61535)- Structure: The box housing is screwed together and sealed to prevent unauthorised opening. This prevents any tampering with the wiring. The internal wiring is printed on a label.- Grey junction box 45 x 95 x 95 mm (H x W x L)Calculation of the connected load of the kitchen connection box:- Total connected load hob socket 11 KW (with symmetrical distribution)- Hob power (4-pole connection) max. 7360 W (2-phase)- Oven power (3-pole connection) max. 3680 W (1-phase)The appliance complies with protection class IP20 and is not suitable for use in damp rooms. Connection and commissioning may only be carried out by a qualified electrician.For safety reasons, a desktop socket should not be used to connect several current collectors via the shell coupling. Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com