Condensation water separator

Description: KDAKDA 150 condensation water separator, light greyThe round COMPAIR® KDA 150 condensation water separator prevents condensation water from running back into the extractor bonnet in the kitchen. It is used in particular with a vertical exhaust air duct. Sharp-edged flow break-off edges optimise the air flow. The conical design allows exhaust air hoses or pipes with a cross-section of 125 or 150 mm to be connected on both sides. If required, the 125 mm section can be cut off at the cutting line. The condensate drain is made of robust plastic.Prevents condensation from running back into the extractor bonnet with vertical exhaust air routing. Flow-optimised design by avoiding sharp-edged flow break-off edges. Connection of hoses and pipes to Ø 125 mm and Ø 150 mm possible on both sides. When connecting to Ø 150 mm, the Ø 125 mm section must be cut off at the cutting line provided. Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionSTEEL flow SR-KDA 150 condensation water separator, galvanised steelThe COMPAIR® STEEL flow SR-KDA 150 condensation water separator is used to drain condensation water so that it does not flow back into the extractor bonnet when the exhaust air is routed vertically. It is suitable for the SR-R flex and SR-R round ducts. The condensate drain can also be used for connection to a plastic pipe. The filling volume is 115.5 ml.Prevents condensation from running back into the extractor bonnet with vertical exhaust air routing. Flow-optimised design by avoiding sharp-edged flow break-off edges.- Filling volume 115.5 ml- Suitable for SR-R flex and SR-R round ducts- Connection to a plastic round duct possible Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com