Naber 4033043, flow Star GTS 125 F wall conduct white, stainless steel
Product number:
4033043
Product information "Naber 4033043, flow Star GTS 125 F wall conduct white, stainless steel"
Description
flow Star GTS 125 F wall conduct, white, stainless steel
The COMPAIR® flow Star GTS 125 F wall conduct is used as a wall duct in ventilation technology and is suitable for discharging exhaust air to the outside. The baffle technology used creates an optimised flow pattern with high performance and minimal pressure losses. The high energy caused by the large flow cross-section is reliably absorbed by the additionally installed compression spring. The exhaust air wall conduct has spring force and additional magnets for easy opening and closing. It is equipped with a 174 mm x 82 mm rectangular support for connecting a rectangular duct. Due to the pipe diameter of 125 mm, a wall opening of approx. 132 mm is required. The support pipe can be reliably installed with a core drill hole. As the wall duct is telescopic, the length of the duct can be adjusted from 314-550 mm depending on the wall thickness. The pipe can be shortened to a size of 285 mm according to individual requirements. For the outer finish, the wall duct has a round outer cover made of stainless steel, which gives it an elegant appearance and also scores points for its high stability.
With connection to COMPAIR® flow 125 rectangular duct and round stainless steel outer cover.
- Required opening pressure 100 Pa
- Stainless steel cover Ø 197 mm
- Pipe spigot 174 x 82 mm, spigot depth 80 mm
- Installation depth 314-550 mm, can be shortened to 285 mm, wall opening Ø approx. 132 mm
- A core hole (Ø 132 mm) is recommended for the installation of the support pipe
With connection to COMPAIR® flow 125 rectangular duct and round stainless steel outer cover.
- Required opening pressure 100 Pa
- Stainless steel cover Ø 197 mm
- Pipe spigot 174 x 82 mm, spigot depth 80 mm
- Installation depth 314-550 mm, can be shortened to 285 mm, wall opening Ø approx. 132 mm
- A core hole (Ø 132 mm) is recommended for the installation of the support pipe
Manufacturer information according to general product safety (GPSR)
Naber GmbH
Enschedestr. 24
48529 Nordhorn
Germany
Login