Compair PRIME flow System 150

Description PRIME flowPRIME flow plinth corner panels, H 130 mm, stainless steel colouredThe COMPAIR® PRIME flow plinth corner panels are part of the functional Presa plinth system. They are manufactured in solid quality from anodised aluminium and form a visually attractive finish to the ventilation grilles at internal and external corners. Identical to the range, the cover is available in matching heights and surface designs.For Presa plinth system. Made of anodised aluminium.Can be used as an internal and external corner. Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow plinth corner panels, H 130 mm, matt blackThe COMPAIR® PRIME flow plinth corner panels are part of the functional Presa plinth system. They are manufactured in solid quality from anodised aluminium and form a visually attractive finish to the ventilation grilles at internal and external corners. Identical to the range, the cover is available in matching heights and surface designs.For Presa plinth system. Made of anodised aluminium.Can be used as an internal and external corner. Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Product descriptionFlat duct support 150, stainless steelThe COMPAIR® flow flat duct support 150 is used for installing flat ducts with a diameter of 150 mm on ceilings and walls. Made of stainless steel, it is characterised by long-lasting quality and guarantees a high level of stability. The bracket is installed quickly and easily by screwing it on.For installing the flat duct on ceilings and walls. Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description: THERMOBOXTHERMOBOX 150, black, silverThe COMPAIR® flow THERMOBOX 150 heat backflow damper is suitable for retrofitting existing wall boxes from the Naber® range. If the exhaust air is discharged via the roof, vertical installation is also possible. The blower door-certified non-return damper scores points with technical innovations such as heat-insulating reflective layers and a magnetic closing mechanism. A predefined opening pressure of the exhaust air prevents rattling, with full opening occurring even at a low volume flow. When the cooker bonnet is switched off, the heat retention system closes automatically to prevent energy losses due to the ingress of cold air. Thanks to a shape that is optimally adapted to the pipe, retrofitting is extremely easy.THERMOBOX heat retention system for retrofitting to existing Naber® wall conducts and suitable for vertical installation (exhaust air routed via the roof).- Blower door certified (required opening pressure >65 Pa) Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Description: NaberNaber 4043069, COMPAIR® Tower, external louvre, stainless steelThe COMPAIR® PRIME flow Tower air outlet is a flexible solution for actively directing exhaust air to the outside in downdraft extractor systems. It can be used in combination with a free-standing cooking island and can supplement the COMPAIR® exhaust air duct in the floor structure and under the storey ceiling. The condensate drain replaces a classic wall conduct, which cannot be used depending on the structural conditions. It is part of the COMPAIR PRIME flow® system, which is characterised above all by innovative and energy-saving features. The tower has a discreet design, impresses with a high-quality matt stainless steel surface and thus blends harmoniously into the exterior design of the building. It is equipped with a blower door-certified THERMOBOX, which prevents draughts from entering the room. At the same time, the heat retention system effectively protects against heat loss. The exhaust air system can be installed either on the wall of the house or free-standing in the garden. This requires a wall duct of size KG 160 with an external sleeve. The installation depth can be up to a maximum of 800 mm below the turf. The air diffuser is compatible with the flat and round ducts from the programme.Stainless steel air diffuser incl. THERMOBOX and condensate drain. Suitable for installation on the house wall or free-standing in the garden.A wall duct must be provided on site (KG 160 with external sleeve).- Depth up to a maximum of 800 mm below the turf- Tower dimensions H 757 mm x Ø 168 mm- Blower door certified (required opening pressure > 65 Pa) Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Description: PRIME flowPRIME flow P-Turbo 150 external louvre, Ø 150 mm, stainless steelWith its elegant round tube design, the COMPAIR® PRIME flow P-Turbo 150 external louvre provides a high-quality finish to the exhaust air system on the façade. It is intended for use with a THERMOBOX. The mechanical heat retention system prevents draughts from entering and heat loss in the kitchen. The cover flap is made of stainless steel. It has a diameter of 150 mm and a socket depth of 100 mm. The louvre vent is fitted with a foam and lip seal. It can be installed without tools.Without backflow flap for connection to round duct.- Spigot depth 100 mm incl. foam and lip seal- Only for use with the THERMOBOX Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionGREENflow cold shrink tape, L 15 mThe COMPAIR® GREENflow cold shrink tape enables reliable sealing of air ducts and is intended for indoor use. As it is self-vulcanising, it bonds to itself and thus creates a permanently strong connection. Other properties include high resistance to changes in humidity and temperature. The sealing tape can also be used for irregular surfaces without any problems. The total length is 15 metres.Adhesive tape for sealing air ducts.- Self-vulcanising adhesive tape- for indoor use- Suitable for irregular surfaces- High resistance to changes in humidity and temperature- 15 m x 50 mm (L x W) Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-VRO 150 flat duct pipe, light greyThe 100 cm long COMPAIR® PRIME flow P-VRO 150 flat duct pipe is a high-quality component for installing an exhaust air duct in the kitchen. It has a connection cross-section of 222 x 89 mm and can be installed vertically or horizontally. Installation in the floor is also possible thanks to the use of optional support bars. The ventilation duct also provides a guide for a cable duct, which is available as an accessory. Thanks to the N-click system, a fixed and adhesive-free connection can be created using the separate universal connector.- N-click system for a secure connection with the universal connector- Cable routing in the ventilation duct (optional)- Laying in the floor structure with support bar (optional)- Length 1000 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyTelephone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-KBK cable duct, light greyThe practical COMPAIR® PRIME flow P-KBK cable duct allows cables to be conveniently laid directly in the exhaust air duct. In this way, power supply cables or connection cables can be laid invisibly in the kitchen. The cable duct has a cross-section of 9 mm with a width of 18 mm and is designed for insertion into P-VRO 150 flat ducts and P-RRO 150 round ducts. The flat or round ducts are already equipped with a guide rail. Integration is carried out without tools.- Insertion into P-VRO 150 flat duct and P-RRO 150 round duct- for cable routing in the air duct: Width 18 mm, Ø 9 mm- Length 900 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionPRIME flow P-STS 150 support bar, light greyThe COMPAIR® PRIME flow P-STS 150 support bar increases the stability of the flat duct. It is used in particular with trough ventilators and is used for laying the exhaust air duct in the floor structure. The bar is intended for insertion into P-VRO 150 flat ducts, which already provide a corresponding guide. The hollow chamber enables cable routing on both sides. The length of the stabiliser is 400 mm. Two bars per metre are recommended for a stable structure. The tread load is then up to 100 kg.- Insertion into P-VRO 150 flat trunking tube- for laying in the floor structure- Two bars per metre- Step load 100 kg- With integrated cable guide- Length 400 mm Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-UVB 150 universal connector, light greyThe COMPAIR® PRIME Flow P-UVB 150 universal connector serves as a flexible connecting element for flat ducts and flat duct bends. It is part of the innovative COMPAIR® Flow system, which enables complex recirculation and exhaust air solutions with high efficiency. The ventilation moulding consists of hard and soft components and is manufactured in one piece, which noticeably extends its service life. Other highlights include two integrated lip seals for airtight assembly of the individual elements within the system structure. This fulfils at least the requirements of tightness class ATC3 in accordance with DIN EN 16798. The integrated expansion joint also enables flexible installation, which opens up a vertical and horizontal range of 0°-15°. External grip points improve the haptics and at the same time ensure decoupling of structure-borne noise. The moulded part has a length of 85 mm.- Flexible connector for flat duct pipes and flat duct pipe bends- Made in one piece from soft and hard components- 2-lip seal for airtight installation, fulfils at least tightness class ATC3 in accordance with DIN EN 16798 in the system structure- External grip points for better haptics and to decouple structure-borne noise- Compensator for flexible installation, horizontal/vertical 0°-15°- Length 85 mm Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-BA 150 adapter, light greyThe COMPAIR® PRIME flow P-BA 150 adapter is used to connect a ventilation system from the COMPAIR® PRIME flow system directly to BORA extractor systems and ducting elements. It is predominantly used with trough extractors. The optimised flow guidance enables a loss-free transition between the systems. The connecting element offers the innovative N-click technology for tool-free grid installation with the universal connector from the accessories.- N-click system for a secure connection with the universal connector- enables direct connection of the Naber COMPAIR®-PRIME-flow system to BORA extractor systems and duct elements- Optimised flow routing enables a loss-free transition Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-RBH 150 horizontal pipe bend 90°, light greyThe horizontal COMPAIR® PRIME flow P-RBH 150 pipe bend is a convenient connecting element for the exhaust air system in the kitchen. Designed as a 90° elbow, the moulded ventilation component offers the option of changing the direction of the exhaust air duct. It is suitable for connecting flat ducts with an opening cross-section of 222 x 89 mm. The moulded part has special air deflectors that ensure a low-loss flow. Thanks to the N-click system, tool-free installation is possible with the separately available universal connector.- N-click system for a secure connection with the universal connector- with optimised air deflectors- Flow-optimised Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-RBH 150 horizontal pipe bend 30°, light greyThe horizontal COMPAIR® PRIME flow P-RBH 150 pipe bend allows the exhaust air duct to change direction at an angle of 30°. The connecting element is used to connect to a flat duct with a cross-section of 222 x 89 mm. Due to the nature of the ventilation moulding, the exhaust air flow is improved with low losses. The N-click system and the optionally available universal connector enable secure and tool-free installation.- N-click system for a secure connection with the universal connector- Improved air flow Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-RBV 150 vertical 90° pipe bend, light greyThe vertical COMPAIR® PRIME flow P-RBV 150 pipe bend ensures a 90° change in direction of the exhaust air duct. It enables the connection of flat ducts with an opening size of 222 x 89 mm. The connecting element is equipped with optimised air guide chambers to prevent flow losses. In combination with the separately available universal connector, the ventilation moulding can be easily installed without the use of tools or adhesive tape thanks to N-click technology.- N-click system for a secure connection with the universal connector- with optimised air deflectors- Flow-optimised Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-RBFLEX System 150 elbow with flex duct, light greyThe COMPAIR® PRIME flow P-RBFLEX System 150 pipe bend with flexible duct enables adaptable exhaust air routing in the kitchen. It achieves deflections of the exhaust air flow at a variable angle of up to 90°. The integrated air deflectors ensure significantly reduced flow resistance compared to other flexible hoses. The connecting element is designed for connecting flat ducts with a cross-section of 222 x 89 mm. The integrated N-click system ensures secure and adhesive-free installation in combination with the universal connector from the accessories.- N-click system for a secure connection with the universal connector- for deflections of up to 90- Significantly reduced flow resistance compared to flexible hoses- To achieve optimum flow performance: Only use deflectors with a flexible duct in exceptional cases if there is no other technical option.- Length 250-550 mm- Ensure smooth-walled, tight installation of the flexible duct! Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-UR 150 deflector 90°, light greyThe COMPAIR® PRIME flow P-UR 150 diverter branches off the kitchen exhaust air duct at an angle of 90°. At the same time, it connects a 150 mm round duct with a 222 x 89 mm flat duct. Inside, optimised air baffles ensure efficient flow technology. The ventilation moulding can be combined with round or flat exhaust air ducts. It is also possible to connect a flexible duct. The integrated N-click grid technology ensures secure and tool-free installation using the optional universal connector.- N-click system for a secure connection with the universal connector- with optimised air deflectors- Flow-optimised Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-UR 150 deflector 90° with round pipe, light grey, L 500 mmThe high-quality COMPAIR® PRIME flow P-UR 150 deflector 90° with round duct ensures safe exhaust air routing in the kitchen. It integrates a change of direction and connection to a flat duct measuring 222 x 89 mm. Air baffles are installed in the moulded part to optimise the air flow. The set also includes a universal connector, which enables a tool- and tape-free connection via snap-in lugs. The round pipe has a diameter of 150 mm and can be selected in different lengths.- incl. universal connector- Flow-optimised- Latches for a secure connection with the universal connector- Installation without adhesive tape or tools- Ensure smooth-walled, tight installation of the flexible duct! Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-UR 150 deflector 90° with round pipe, light grey, L 1000 mmThe high-quality COMPAIR® PRIME flow P-UR 150 deflector 90° with round duct ensures safe exhaust air routing in the kitchen. It integrates a change of direction and connection to a flat duct measuring 222 x 89 mm. Air baffles are installed in the moulded part to optimise the air flow. The set also includes a universal connector, which enables a tool- and tape-free connection via snap-in lugs. The round pipe has a diameter of 150 mm and can be selected in different lengths.- incl. universal connector- Flow-optimised- Latches for a secure connection with the universal connector- Installation without adhesive tape or tools- Ensure smooth-walled, tight installation of the flexible duct! Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-URX 150 deflector 90° with flexible duct, light grey, L 500 mmWith the flexible COMPAIR® PRIME flow P-URX 150 deflector, the exhaust air duct in the kitchen can be laid individually. The ventilation moulding provides a 90° bend with a change from a flat duct to a 150 round duct. The connecting element is combined with a round flexible pipe, which should be laid as tightly and smooth-walled as possible. Two hose clamps are included in the scope of delivery. The moulded part is compatible with the N-click system, which creates a secure and tool-free connection for the optional universal connector.- N-click system for a secure connection with the universal connector- incl. two hose clamps- Significantly reduced flow resistance compared to flexible hoses- To maintain optimum flow performance: Only use deflectors with a flexible duct in exceptional cases if there is no other technical option.- Ensure smooth-walled, tight installation of the flexible duct! Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow P-URX 150 deflector 90° with flexible duct, light grey, L 1000 mmWith the flexible COMPAIR® PRIME flow P-URX 150 deflector, the exhaust air duct in the kitchen can be laid individually. The ventilation moulding provides a 90° bend with a change from a flat duct to a 150 round duct. The connecting element is combined with a round flexible pipe, which should be laid as tightly and smooth-walled as possible. Two hose clamps are included in the scope of delivery. The moulded part is compatible with the N-click system, which creates a secure and tool-free connection for the optional universal connector.- N-click system for a secure connection with the universal connector- incl. two hose clamps- Significantly reduced flow resistance compared to flexible hoses- To maintain optimum flow performance: Only use deflectors with a flexible duct in exceptional cases if there is no other technical option.- Ensure smooth-walled, tight installation of the flexible duct! Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow Prime 150 flat duct set-1, light greyWith the COMPAIR® PRIME flow 150 flat duct set-1, the exhaust air system can be conveniently installed in the kitchen. The exhaust air combination includes a deflector from flat to round, which is equipped with air guide elements to optimise the flow. It is connected to a 100 cm long round pipe. The set also includes two 100 cm long flat duct pipes, a flat duct connection sleeve and an end or transition piece. The enclosed adhesive tape ensures that the individual elements are firmly and securely connected.- N-click system for a secure connection with the universal connector- with optimised air deflectors- Flow-optimisedSet consisting of:- 2 x P-VRO 150 flat duct pipe (4051001)- 1 x P-UR 150 deflector 90° (4051011)- 1 x P-RRO 150 round duct, 1000 mm (4051023)- 1 x P-EST 150 end piece (4051018)- 1 x P-UVR 150 universal connector, round (4051024)- 3 x P-UVB 150 universal connector, flat (4051004) Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

Description PRIME flowPRIME flow Prime 150 flat duct set-2, light greyThe sturdy COMPAIR® PRIME flow 150 flat duct set-2 is used to customise the installation of an exhaust air system in the kitchen. It consists of a deflector piece from flat duct to round duct, which is connected to a 100 cm long round pipe. The integrated air deflectors optimise the air flow. The exhaust air combination also includes three 100 cm flat duct pipes, a horizontal pipe bend at a 90° angle, two connecting sleeves and an end/transition piece. The included adhesive tape ensures a secure connection.- N-click system for a secure connection with the universal connector- with optimised air deflectors- Flow-optimisedSet consisting of:- 3 x P-VRO 150 flat duct pipe (4051001)- 1 x P-UR 150 deflector 90° (4051011)- 1 x P-RRO 150 round duct, 1000 mm (4051023)- 1 x P-EST 150 end piece (4051018)- 1 x P-RBH 150 Horizontal pipe bend 90° (4051006)- 1 x P-UVR 150 universal connector, round (4051024)- 5 x P-UVB 150 universal connector flat (4051004) Manufacturer information according to general product safety regulations (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com

DescriptionP-EST 150 end piece, connecting element, light greyThe COMPAIR® PRIME flow P-EST 150 end piece ensures a direct transition from a flat to a round exhaust air duct. Its use allows the kitchen ventilation system to be installed flexibly. Optimised flow routing enables a loss-free transition. The ventilation moulding has a round connection piece with a diameter of 150 mm to a flat connection measuring 222 x 89 mm. Thanks to the N-click technology, the connection element can be fitted without tools or adhesive.- N-click system for a secure connection with the universal connector- for direct transition from flat to round- Optimised flow guidance enables a loss-free transition Manufacturer information according to general product safety (GPSR)Naber GmbHEnschedestr. 2448529 NordhornGermanyPhone: +49 5921 704-0E-mail: naber@naber.com